RS MaxPox® Epoxy resin systems for RS MaxLiner®

Epoxy resin systems for highest demands

RS Technik relies on a solvent-free 2-component epoxy resin for the RS MaxPox® renovation system. It has excellent adhesion properties on conventional sewage pipe materials, even on wet surfaces.
Application under construction site conditions is simple and reliable.

For standard applications, the two-component epoxy resin systems MaxPox® are part of a DIBt approval.

RS MaxPox | Zwei-Komponenten-Epoxidharzsystem | Systeme für die Kanalsanierung.

RS Maxliner - Schlauchleiner Querschnitt Dimensionsübergang

RS Maxliner - Schlauchleiner DN 150 Querschnitt

Dimensionsübergang Querschnitt Maxliner Schlauchliner

Maxliner Schlauchliner Bögen Querschnitt

MaxPox® Eco Epoxidharz

The MaxPox® Eco epoxy resin system is an SVHC-free two-component epoxy resin. The resin system has a modular design in pot life of 20min, 40min, 70min and 120min. It has a reduced flow behavior with less excess resin and a reliable end wall thickness.

rs-max-pox-eco-liner-harz-rohrsanierung-2

ENVIRONMENTALLY FRIENDLY • POLLUTANT-FREE
FUTURE-PROOF

MaxPox® 15M epoxy resin

The epoxy resin system made of MaxPox® 15 M (resin, 100 parts by weight) and MaxPox® 20 (hardener, 25 parts by weight) was specially developed for the rehabilitation of sewage pipes and lines in the house connection area and is therefore an integral part of the RS MaxLiner® and RS MaxLiner® S rehabilitation systems.

MaxPox® 20 Hardener

Hardener component for processing with the resin MaxPox 15M
Working time at 20°C approx. 20 to 30 minutes
Hot curing with water or steam

MaxPox® 40 Hardener

Hardener component for processing with the resin MaxPox 15M
Working time at 20°C approx. 40 min.
Suitable for cold curing, hot curing with water or steam

MaxPox® 70 Hardener

Hardener component for processing with the resin MaxPox 15M
Working time at 20°C approx. 70 min.
Suitable for cold curing, hot curing with water or steam

MaxPox® 120 Hardener

Hardener component for processing with the resin MaxPox 15M
Working time at 20°C approx. 120 min.
Hot curing with water or steam

MaxPox® Fill A (resin) | Fill B 30, 60, 90 (hardener)

Prefilled and yellow colored two-component epoxy resin system with improved flow behavior
High viscosity for good hold in the support material
Processing time at 20°C approx. 30/60/90 min (depending on hardener components)
Hot and cold curing possible
B 30 suitable for cold curing, B 60 and B 90 for hot curing only

Developed especially for the RS MaxLiner® Fix, as a filled, highly viscous (viscous) resin adheres better to the carrier material.

MaxPox® Thermo

MaxPox® Thermo is a solvent-free, red pigmented, two-component epoxy resin system specially designed for the rehabilitation of industrial wastewater pipes. It is characterized by a very long processing time as well as a very high thermal and chemical resistance.

High temperature resistance up to 90°C
Only suitable for hot curing with water or steam, at min. 60°C
Long processing time at 20 °C approx. 16 h

Advantages of the epoxy resin system for our RS MaxLiner®

Free of fillers and dyestuffs

Very good chemical resistance, hardly any shrinkage - very dimensionally stable

Good cold hardeners, good long-term stability and dimensional stability

For cold curing (except 120) and hot curing with water or steam

Do You Have Questions?

Would you like to know more, do you have a specific question about the two-component epoxy resin system or would you like to place an order? We will be happy to help you directly.